Wooden Signs

In most cases, wooden signs are affixed to sturdy poles for display. While drilled holes are an option when ordering your sign we do not provide any of the hardware for posting your sign, including the screws.

For small to medium sized signs (less than 36”) typically poles on either end of the sign should be sufficient. For signs that are larger than 36”, depending on the location, we recommend using a middle support pole when posting your sign. This will help prevent damage from high winds and other unforeseen circumstances.

In addition to using your signs with posts they can be displayed in several ways. One common use for smaller signs is to use the drilled holes and chains to hang the wooden sign from hooks. Again, larger signs would need additional drilled holes and hooks for extra support.

The signs can also be affixed to any rigid surface such as a wooden, drywall or concrete walls. Depending on what type of surface it is will dictate how you install your sign. Typically though drilling pilot holes, using anchors for the wall, and a combination of a screw and washer should do the trick to firmly attach the sign to the surface.

Installation will vary from place to place but should take into consideration foot traffic and exterior elements alike. Rubbing against the sign or inadvertently bumping into it can damage the sign and/or your wall while exterior elements can shorten the lifespan. Thus, some forethought as to the placement of the sign can prevent future damage or incidents in many cases.

Cleaning your wood sign on a regular basis is recommended and easy to do. A damp non-abrasive cloth or rag is all that is needed in order to wipe down your sign. Make sure that there aren’t any rocks or sharp objects on the sign or within the rag before wiping it down to prevent scratching. Otherwise, a gentle wiping down will help remove any dirt buildup that may occur on the sign, particularly on those used or posted outdoors.  We also recommend avoiding harsh or strong chemicals or cleaners when you wiping your sign. A damp cloth should be sufficient to clean your wooden sign.

If your sign has been coated with our protective laminate, we recommend using a citrus-based cleaner. You can also clean using a mixture of 70% isopropyl alcohol and 30% water.

You can use a moist towel to wipe down these signs and clean them. Steer clear of fire and other sources of intense heat. Keep it dry and cold in storage. Should the protective laminate covering your wooden sign be removed, we advise using a fresh cloth and a citrus-based cleanser or a 70% isopropyl alcohol and 30% water mixture for cleaning. But if you are looking for a product that is more suitable for dry erase, you might want to consider our foam board signs instead. You may click the link below to learn more:

Foam Board Signs

Our wooden signs come with unfinished or unsealed edges that reveal the wooden look of the sign material for an added aesthetic touch. If you wish to request that they be sealed, we would have to check with our team to see if this is doable. Kindly fill out the form at the link below:

https://www.signs.com/contact/

The weight of our wooden sign is around 2.23lbs per square foot. The actual weight may vary depending on the full product specifications. 1 piece of 24" x 36" wooden sign weighs about 11 lbs. 

Please provide us the full specifications of your potential order so we can get you a quote. You can submit a custom quote request here:

https://www.signs.com/contact/

Yes. Our yard signs are also best for outdoor use. We also have the option to add hole drills for easy mounting.